Item # DRAD-100-PAM, 100 SCFM Regenerative Desiccant Dryer (DRAD) On Reading Technologies, Inc.

Unit of Measure

Specifications | Dimensions | Features

Air Flow	N/A 100 scfm
Air Connection National Pipe Thread (NPT)	N/A 1 in
Net Weight	N/A 690 lb
Dryer Type	N/A Regenerative Desiccant
Dew Points Temperature	N/A -100 ºF-40 ºF
Voltage Rating	N/A 110 V
Filtration Capacity	N/A 0.01 to 1.0 µm
Inlet Air Temperature	N/A 100 ºF
Ambient Temperature	N/A 100 ºF
Maximum Pressure	N/A 250 psi

N/A

Pilot Air Filter
Separate drain and fill port
Tower pressure gauge
ASME code construction and stamped pressure vessels (6" diameter and larger)
Front mounted control panel
NEMA 4 electrical enclosure on units over 30 SCFM
On/Off Switch
Pre-piped and mounted pre-filter and after-filter
Purge exhaust piston valve
Non-lubricated inlet valve
Structural steel frame with floor stand
Full charge of desiccant
Safety pressure relief valve for each tank
Fail safe design against power failure: bi-directional piston valve remains in the same position to ensure air-flow throughout dryer without interruption
Field adjustable timer cycle: 4, 10, or 15 minutes
High efficiency angle body piston purge valve
Spring load check valves
Stainless steel inlet/outlet diffusers
Filters mounted
Consult Factory for low dew points

Air Flow