Two (2) stage assembly which combines an oil extractor with a high efficiency coalescer to give the best oil and fine particulate capture, in addition to heavy water removal. 99.99998 % efficient at 0.01 micron and to 0.003 PPM. ISO Class 1 for Particulate/Oil.
Unit of Measure
Specifications
Port Size |
N/A 1/4 in |
Thread Styles |
N/A British Standard Parallel Pipe (BSPP), British Standard Pipe Thread (BSPT), National Pipe Thread (NPT) |
Flow Capacity at 100 Pound per Square Inch (psi) Pressure |
N/A 60 scfm |
Filter Capacity |
N/A 0.01 µ & larger Activated Carbon Oil Adsorption to 0.003 PPM Hydrocarbons |
Differential Pressure at Rated Flow |
N/A < 5.0 psid |
Maximum Temperature |
N/A 175 ºF |
Maximum Pressure |
N/A 60 psig |
Approximate Weight |
N/A 7.0 lb |
International Organization for Standardization (ISO) Class |
N/A 1 Particulate/Oil |
Element Material |
N/A Quad Stage - Stainless Steel, Cotton/Polyester, Activated Carbon, Cotton/Polyester |
Element Tube Material |
N/A Polycarbonate |
Coalescer Grade |
N/A Grade 2 Standard |
Bowl Material |
N/A Aluminum |
Drain Options |
N/A Automatic Float Drain |
Filters |
N/A Dirt, Odor, Oil, Oil Vapor, Water |
Applications
Applications |
N/A Generally used at point-of-use where heavy water, dirt, oil, and oil aerosol removal is needed. |
Note
Note |
N/A For higher pressure applications, consult factory. Units equipped with differential pressure indicator have max. temperature and pressure of 125 ºF and 150 PSIG, regardless of bowl material. |
Replacement Parts & Accessories
Replacement Parts & Accessories |
N/A
Item # - 4P-060 Item Name - Replacement Element, 1st Stage Item # - 3C-060 Item Name - Replacement Element, 2nd Stage Item # - N32-W1-DPi Item Name - Differential Pressure Indicator Item # - N32-95-020 Item Name - Blanking Cap (Cover for Indicator) Item # - N32-95-201 Item Name - Bowl Assembly: Metal Bowl, Auto Float Drain, & O-Ring Item # - N32-95-979 Item Name - Automatic Plastic Float Drain (Metal Bowl) Item # - N32-95-257 Item Name - Bowl O-Ring |
- 1 To add an indicator, add "I" to end of model number (Indicator adds about 1" to height)
