250 Standard Cubic Feet per Minute (scfm) Air Flow Regenerative Desiccant Dryer
Unit of Measure

Specifications

Air Flow

N/A 250 scfm

Air Connection National Pipe Thread (NPT)

N/A 1-1/2 in

Net Weight

N/A 1010 lb

Dryer Type

N/A Regenerative Desiccant

Dew Points Temperature

N/A -100 ºF-40 ºF

Voltage Rating

N/A 110 V

Filtration Capacity

N/A 0.01 to 1.0 µm

Inlet Air Temperature

N/A 100 ºF

Ambient Temperature

N/A 100 ºF

Maximum Pressure

N/A 250 psi

Dimensions

Height

N/A 83.0 in

Width

N/A 40.0 in

Depth

N/A 44.0 in

Features

Features

N/A
  • Pilot Air Filter
  • Separate drain and fill port
  • Tower pressure gauge
  • ASME code construction and stamped pressure vessels (6" diameter and larger)
  • Front mounted control panel
  • NEMA 4 electrical enclosure on units over 30 SCFM
  • On/Off Switch
  • Pre-piped and mounted pre-filter and after-filter
  • Purge exhaust piston valve
  • Non-lubricated inlet valve
  • Structural steel frame with floor stand
  • Full charge of desiccant
  • Safety pressure relief valve for each tank
  • Fail safe design against power failure: bi-directional piston valve remains in the same position to ensure air-flow throughout dryer without interruption
  • Field adjustable timer cycle: 4, 10, or 15 minutes
  • High efficiency angle body piston purge valve
  • Spring load check valves
  • Stainless steel inlet/outlet diffusers
  • Filters mounted
  • Consult Factory for low dew points